R&S FSV3000 Series - Page 1082

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1082User Manual 1178.8520.02 ─ 01
Parameters:
<ChannelName> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 738.
<State> 1 | 0 | ON | OFF
1 | ON
The channel windows are included in the printout.
0 | OFF
The channel windows are not included in the printout.
*RST: 1
Example:
HCOP:CONT WIND
HCOP:PAGE:WIND2:CHAN 'IQ Analyzer',0
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Prints only window 1 in the IQ Analyzer channel.
Manual operation: See " Print Multiple Windows " on page 547
HCOPy:PAGE:WINDow<n>:COUNt <WinPerPage>
This command defines how many windows are displayed on a single page of the print-
out for HCOPy:CONTent on page 1075.
Suffix:
<n>
.
irrelevant
Parameters:
<WinPerPage> integer
*RST: 1
Example:
HCOP:PAGE:WIND2:COUN 2
Manual operation: See " Windows Per Page " on page 554
HCOPy:PAGE:WINDow<n>:SCALe <Mode>
This command determines the scaling of the windows in the printout for HCOPy:
CONTent on page 1075.
Suffix:
<n>
.
irrelevant
Parameters:
<Mode> 1 | 0 | ON | OFF
1 | ON
Each window is scaled to fit the page size optimally, not regard-
ing the aspect ratio of the original display. If more than one win-
dow is printed on one page (see HCOPy:PAGE:WINDow<n>:
COUNt on page 1082), each window is printed in equal size.
("Size to fit")
Managing Settings and Results