R&S FSV3000 Series - Page 1083

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1083User Manual 1178.8520.02 ─ 01
0 | OFF
Each window is printed as large as possible while maintaining
the aspect ratio of the original display.
("Maintain aspect ratio")
*RST: 1
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See " Scaling " on page 554
HCOPy:PAGE:WINDow<n>:STATe <ChannelName>, <WindowName>, <State>
This command selects the windows to be included in the printout for HCOPy:CONTent
on page 1075.
Suffix:
<n>
.
irrelevant
Parameters:
<ChannelName> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 738.
<WindowName> String containing the name of the existing window.
By default, the name of a window is the same as its index.
To determine the name and index of all active windows in the
active channel, use the LAYout:CATalog[:WINDow]? query.
<State> 1 | 0 | ON | OFF
1 | ON
The window is included in the printout.
0 | OFF
The window is not included in the printout.
*RST: 1
Example:
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Manual operation: See " Print Multiple Windows " on page 547
HCOPy:TDSTamp:STATe<device> <State>
This command includes or excludes the time and date in the printout.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
The time and date are printed.
0 | OFF
The time and date are not printed.
Managing Settings and Results