R&S FSV3000 Series - Page 1084

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1084User Manual 1178.8520.02 ─ 01
*RST: 1
Manual operation: See " Print Date and Time " on page 548
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
This command queries the name of the first available printer.
To query the name of other installed printers, use SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT]? on page 1084.
Return values:
<PrinterName> <char_data>
String containing the name of the first printer as defined in Win-
dows.
If the command cannot find a printer, it returns an empty string
(' ').
Usage: Query only
Manual operation: See " Printer Name " on page 552
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
This command queries the name of available printers.
You have to use SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
on page 1084 for this command to work properly.
Return values:
<PrinterName> <char_data>
String containing the name of one printer as defined in Windows.
To get a complete list of printers you have to send this query
several times until no more printers could be found. In that case,
the return value is an empty string (' '). Further queries after the
empty string result in an error.
Usage: Query only
Manual operation: See " Printer Name " on page 552
SYSTem:COMMunicate:PRINter:SELect<device> <PrinterName>
This command selects the printer that processes jobs sent by the R&S FSV/A.
Use HCOPy:DESTination<device> to select another output destination.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<PrinterName> String containing the printer name.
Use
Managing Settings and Results