R&S FSV3000 Series - Page 1078

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1078User Manual 1178.8520.02 ─ 01
'SYST:COMM:PRIN'
Sends the hardcopy to a printer.
You can select the printer with SYSTem:COMMunicate:
PRINter:SELect<device> .
'SYST:COMM:CLIP'
Sends the hardcopy to the clipboard.
The format should be WEMF.
*RST: 'SYST:COMM:CLIP'
Usage: Setting only
Manual operation: See " Destination " on page 552
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State> ON | OFF | 0 | 1
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
Example:
HCOP:DEV:COL ON
HCOPy:DEVice:LANGuage<device> <Format>
This command selects the file format for a print job.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<Format> WMF | GDI | EWMF | BMP | PNG | JPEG | JPG | PDF | SVG |
DOC | RTF
GDI
Graphics Device Interface
Default format for output to a printer configured under Windows.
Must be selected for output to the printer interface.
Can be used for output to a file. The printer driver configured
under Windows is used to generate a printer-specific file format.
Example:
HCOP:DEV:LANG1 PNG
Manual operation: See " Destination " on page 552
HCOPy[:IMMediate<device>]
This command initiates a print job.
Managing Settings and Results