R&S FSV3000 Series - Page 1079

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1079User Manual 1178.8520.02 ─ 01
If you are printing to a file, the file name depends on MMEMory:NAME.
Suffix:
<device>
.
Printing device.
Manual operation: See " Print " on page 550
HCOPy[:IMMediate<device>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Suffix:
<device>
.
Printing device.
Manual operation: See " Print " on page 550
HCOPy:ITEM:WINDow<n>:TEXT <Comment>
This command defines a comment to be added to the printout.
Suffix:
<n>
.
1..n
Parameters:
<Comment> String containing the comment.
Manual operation: See " Comment " on page 547
HCOPy:PAGE:COUNt:STATe <State>
This command includes or excludes the page number for printouts consisting of multi-
ple pages (HCOPy:CONTent on page 1075).
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
The page number is printed.
0 | OFF
The page number is not printed.
*RST: 1
Example:
HCOP:PAGE:COUN:STAT ON
Manual operation: See " Print Page Count " on page 547
HCOPy:PAGE:MARGin<device>:BOTTom <Margin>
This command defines the margin at the bottom of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<device>:UNIT on page 1081.
Managing Settings and Results