R&S FSV3000 Series - Page 1105

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1105User Manual 1178.8520.02 ─ 01
Manual operation: See "Selected File" on page 611
[SENSe:]CORRection:FRESponse:BASeband:USER:FLISt<fli>:INSert <FilePath>
[SENSe:]CORRection:FRESponse:INPut<ip>:USER:FLISt<fli>:INSert <FilePath>
[SENSe:]CORRection:FRESponse:USER:FLISt<fli>:INSert <FilePath>
Loads a frequency response (.fres) file to the current configuration. The maximum
number of files per configuration is 15. The new file is added below the entry specified
by the <fli> index. All other entries with a higher suffix are moved down by one posi-
tion.
Suffix:
<fli>
.
1..n
Index in frequency response file list
Use [SENSe:]CORRection:FRESponse:BASeband:USER:
FLISt<fli>:SIZE? to determine the maximum index number.
Parameters:
<FilePath> string
Path and file name
The default directory for .fres files is C:\R_S\INSTR\USER
\Fresponse.
Example:
SENS:CORR:FRES:USER:FLIS2:INS 'C:\FRes.fres'
Manual operation: See "Add Freq Resp File" on page 611
[SENSe:]CORRection:FRESponse:BASeband:USER:FLISt<fli>:MAGNitude[:
STATe] <State>
[SENSe:]CORRection:FRESponse:INPut<ip>:USER:FLISt<fli>:MAGNitude[:
STATe] <State>
[SENSe:]CORRection:FRESponse:USER:FLISt<fli>:MAGNitude[:STATe] <State>
Activates or deactivates the use of the correction data in the selected file for magnitude
results.
Suffix:
<fli>
.
1..n
Index in frequency response file list
Use [SENSe:]CORRection:FRESponse:BASeband:USER:
FLISt<fli>:SIZE? to determine the maximum index number.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Applies the data for magnitude results.
ON | 1
Does not apply the data for magnitude results.
*RST: 1
Example:
SENS:CORR:FRES:USER:FLIS2:MAGN:STAT ON
Manual operation: See "Magnitude" on page 611
Configuring the R&S FSV/A