R&S FSV3000 Series - Page 1107

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1107User Manual 1178.8520.02 ─ 01
Suffix:
<fli>
.
1..n
Index in frequency response file list
Use [SENSe:]CORRection:FRESponse:BASeband:USER:
FLISt<fli>:SIZE? to determine the maximum index number.
Parameters:
<FilePath> string
Path and file name
The default directory for .fres files is C:\R_S\INSTR\USER
\Fresponse.
Example:
SENS:CORR:FRES:USER:FLIS2:SEL 'C:\FRes.fres'
[SENSe:]CORRection:FRESponse:BASeband:USER:FLISt<fli>:SIZE?
[SENSe:]CORRection:FRESponse:INPut<ip>:USER:FLISt<fli>:SIZE?
[SENSe:]CORRection:FRESponse:USER:FLISt<fli>:SIZE?
Queries the number of entries in the list of .fres files for the current configuration.
Suffix:
<fli>
.
1..n
irrelevant
Return values:
<Size> integer
Range: 1 to 15
*RST: 1
Example:
SENS:CORR:FRES:BASE:USER:FLIS:SIZE?
Usage: Query only
[SENSe:]CORRection:FRESponse:USER:FSTate <State>
Activates or deactivates the use of additional frequency response (.fres) files. The
correction data is these files is applied after any correction settings in active touch-
stone files.
For details, see Chapter 12.6, "Frequency Response Correction (R&S FSV/A-K544)",
on page 604.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Activates the files.
ON | 1
Deactivates the files.
*RST: 1
Example:
SENS:CORR:FRES:USER:FST ON
Manual operation: See "Frequency Response active" on page 610
Configuring the R&S FSV/A