R&S FSV3000 Series - Page 756

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
756User Manual 1178.8520.02 ─ 01
Parameters:
<Name> String containing the name of the channel
*RST: ALT<1...11>
Manual operation: See " Channel Names " on page 166
[SENSe:]POWer:ACHannel:NAME:CHANnel<ch> <Name>
This command defines a name for a transmission channel.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Name> String containing the name of the channel
*RST: TX<1...12>
Manual operation: See " Channel Names " on page 166
[SENSe:]POWer:ACHannel:SPACing[:ACHannel]
<Spacing>
This command defines the distance from transmission channel to adjacent channel.
Parameters:
<Spacing> Range: 100 Hz to 2000 MHz
*RST: 14 kHz
Default unit: Hz
Manual operation: See " Channel Spacings " on page 165
See " Adjacent Channel Spacings " on page 176
[SENSe:]POWer:ACHannel:SPACing:ALTernate<ch> <Spacing>
This command defines the distance from transmission channel to alternate channels.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Spacing> Range: 100 Hz to 2000 MHz
*RST: 40 kHz (ALT1), 60 kHz (ALT2), 80 kHz (ALT3), ...
Default unit: Hz
Manual operation: See " Channel Spacings " on page 165
See " Adjacent Channel Spacings " on page 176
[SENSe:]POWer:ACHannel:SPACing:CHANnel<ch> <Spacing>
This command defines the distance between transmission channels.
Configuring and Performing Measurements