R&S FSV3000 Series - Page 755

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
755User Manual 1178.8520.02 ─ 01
[SENSe:]POWer:ACHannel:BWIDth:ALTernate<ch> <Bandwidth>
[SENSe:]POWer:ACHannel:BANDwidth:ALTernate<ch> <Bandwidth>
This command defines the channel bandwidth of the alternate channels.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Bandwidth> Range: 100 Hz to 1000 MHz
*RST: 14 kHz
Default unit: Hz
Manual operation: See " Channel Bandwidth " on page 164
See " Adjacent Channel Bandwidths " on page 177
[SENSe:]POWer:ACHannel:BWIDth[:CHANnel<ch>]
<Bandwidth>
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel<ch>] <Bandwidth>
This command defines the channel bandwidth of the transmission channels.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Bandwidth> Range: 100 Hz to 1000 MHz
*RST: 14 kHz
Default unit: Hz
Manual operation: See " Channel Bandwidth " on page 164
See " Channel Bandwidth " on page 198
See " Channel Bandwidth " on page 203
[SENSe:]POWer:ACHannel:NAME:ACHannel <Name>
This command defines a name for the adjacent channel.
Parameters:
<Name> String containing the name of the channel
*RST: ADJ
Manual operation: See " Channel Names " on page 166
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch> <Name>
This command defines a name for an alternate channel.
Suffix:
<ch>
.
1..n
Alternate channel number
Configuring and Performing Measurements