R&S FSV3000 Series - Page 758

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
758User Manual 1178.8520.02 ─ 01
[SENSe:]POWer:ACHannel:FILTer:ALPHa[:ALL] <Value>
This command defines the alpha value for the weighting filter for all channels.
Parameters:
<Value> *RST: 0.22
Example:
POW:ACH:FILT:ALPH:ALL 0.35
[SENSe:]POWer:ACHannel:FILTer:ALPHa:ALTernate<ch> <Alpha>
This command defines the roll-off factor for the alternate channel weighting filter.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Alpha> Roll-off factor
Range: 0 to 1
*RST: 0.22
Manual operation: See " Weighting Filters " on page 166
See " Weighting Filters " on page 177
[SENSe:]POWer:ACHannel:FILTer:ALPHa:CHANnel<ch> <Alpha>
This command defines the roll-off factor for the transmission channel weighting filter.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Alpha> Roll-off factor
Range: 0 to 1
*RST: 0.22
Manual operation: See " Weighting Filters " on page 166
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel <State>
This command turns the weighting filter for the adjacent channel on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See " Weighting Filters " on page 166
See " Weighting Filters " on page 177
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL] <State>
This command turns the weighting filters for all channels on and off.
Configuring and Performing Measurements