Ricoh D065 - Page 1113

Bit Switches - 3
D418 100 SM
Communication Switch 00 (SP No. 1-104-001)
No Function Comments
5
JBIG compression method: Reception
0: Only basic supported
1: Basic and optional both supported
Change the setting when
communication problems occur
using JBIG compression.
6
JBIG compression method: Transmission
0: Basic mode priority
1: Optional mode priority
Change the setting when
communication problems occur
using JBIG compression.
7
Closed network (reception)
0: Disabled
1: Enabled
1: Reception will not go ahead if the
polling ID code of the remote
terminal does not match the polling
ID code of the local terminal. This
function is only available in
NSF/NSS mode.