Punch Unit (B702)
D062/D063/D065/D066 2-66 SM
2.11 PUNCH UNIT (B702)
The Punch Unit B702 can be installed only in the 2000/3000-Sheet Finisher D373/D374.
2.11.1 ACCESSORIES
Check the accessories and their quantities against the following list.
Description Q’ty
1. Punchout Waste Unit 1
2. Slide Drive Unit 1
3. Punch Waste Hopper 1
4. Screws (M3 x 6) 5
5. Side-to-Side Detection Unit 1
6. Punching Unit 1
2.11.2 INSTALLATION PROCEDURE
Always turn the machine off and unplug the machine before doing any of the
following procedures.
To Next Page
Loading...
