Ricoh D065 - Charge Corona Unit; Charge Corona Wire and Grid

Drum Unit
D062/D063/D065/D066 4-28 SM
test unit and the machine that you are going to move it to.
2. Install the test development unit, then input the V
REF
for this unit into SP2220.
3. After the test, reinstall the old development unit, and change SP2220 back to the
original value.
4.6.2 CHARGE CORONA UNIT
 Remove the development unit. (
p.4-25)
1. Charge corona unit [A] (
x 1, x 1)
4.6.3 CHARGE CORONA WIRE AND GRID
 Remove the charge corona unit. (
p.4-28)
1. Grid [A] (
x 1)