Ricoh D065 - Other Problems; Blown Fuse Conditions; Common Problems

Other Problems
D062/D063/D065/D066 6-16 SM
6.6 OTHER PROBLEMS
6.6.1 BLOWN FUSE CONDITIONS
Rating
Fuse
115 V 210~230V
Symptom at Power On
FU1 2A/125V 6.3A/250V Anti-condensation heater does not operate.
FU101 12A/125V 6.3A/250V No response.
FU103 6.3A/125V 6.3A/250V SC510 is displayed.
FU104 6.3A/125V 6.3A/250V Nothing displayed on LCD.
FU105 6.3A/125V 6.3A/250V “Door Open” is displayed.
FU106 6.3A/125V 6.3A/250V ADF does not operate.
FU107 6.3A/125V 6.3A/250V SC121 is displayed.
FU108 6.3A/125V 6.3A/250V Finisher does not work.
FU109 6.3A/125V 6.3A/250V “Door Open” is displayed.
FU110 6.3A/125V 6.3A/250V SC510 is displayed.
FU111 6.3A/125V 6.3A/250V Nothing is displayed on LCD.
6.6.2 COMMON PROBLEMS
Problem Check Inspect, Clean, Replace
Dirty Copies Fusing Unit Pressure roller
Jam – Fusing Unit Fusing Unit Hot roller
Jam – Fusing Unit Fusing Unit Hot roller strippers
Jam – Original ADF Pick-up, paper feed, separation rollers