Ricoh D065 - To Select the Target for the Debug Log File

Using the Debug Log
SM 5-25 D062/D063/D065/D066
System
Maintenance
5. Push .
<On/Off>
ON
6. Push [#Enter].
<On/Off>
*ON
7. Push [Esc].
SP5857-001
On/Off
Do the next procedure to select the target.
To Select the Target for the Debug Log File
You can select either the HDD (default) or the SD card as the target. This procedure shows
you how to select the SD card.
1. Push
.
SP587-002
Target
2. Push [#Enter].
<Target>
*2:HDD
3. Push
.
<Target>