Ricoh D065 - Reinstallation

Paper Feed
SM 4-99 D062/D063/D065/D066
Replacement
and
Adjustment
5. By-pass table [D] (
x 2)
6. By-pass paper size detection board [E] (
x 2)
Reinstallation
After installation, execute SP1904 to calibrate the maximum and minimum paper sizes for
the side fences:
 SP1904-001 By-pass Tray Paper Size Detection – Minimum Size: Move the side
fences to the minimum size, then execute this SP.
 SP1904-002 By-pass Tray Paper Size Detection – Maximum Size: Move the side
fences to the maximum size, then execute this SP.