Ricoh D065 - Page 359

Using the Debug Log
D062/D063/D065/D066 5-28 SM
6. Repeat this procedure to select either 002 or 004.
Example 2: To set an SC code with 003
This example shows you how to enter "672" for SC672.
 For details about SC code numbers, please refer to the SC tables in Section "4.
Troubleshooting".
1. Select "SP5858-003".
SP5858-003
Any SC Code
2. Push [#Enter].
0000000
_
3. Push [#Enter] to toggle the on the number display in the 2nd line.
0000000
0
4. Push
or to display "2".
0000000
2
5. Push [#Enter] to enter the "2" in the line above.
0000002
_
6. Push
or to move the cursor to the next digit.