Ricoh D065 - Page 565

Service Program Mode Tables
D062/D063/D065/D066 4-32 SM Appendix
012
Timing: Thick
Paper Lc
Adjusts the transfer current OFF timing for copying thick
paper.
[–30 to +30/15/1 mm]
013
On Timing:
M-Thick
Adjusts the transfer current ON timing for copying with
M-thick paper.
[–30 to +30/0/1 mm]
014
Leading Edge:
M-Thick
Adjusts the area where the transfer current is applied for the
leading edge during copying with M-thick paper.
[0 to +20/0/1 mm]
015
Trailing
Edge:M-Thick
Adjusts the area where the transfer current is applied for the
trailing edge during copying with M-thick paper.
[0 to +20/0/1 mm]
016
Off Timing:
M-Thick
Adjusts the transfer current OFF timing for copying with
M-thick paper.
[–30 to +30/15/1 mm]
017
On Timing: After
Punch
Adjusts the transfer current ON timing for copying with
punch.
[–30 to +30/20/1 mm]
018
Leading Edge:
After Punch
Adjusts the area where transfer current is applied for the
leading edge during copying with punch.
[0 to +20/0/1 mm]
019
Trailing Edge:
After Punch
Adjusts the area where transfer current is applied for the
trailing edge during copying with punch.
[0 to +20/0/1 mm]
020
Off Timing: After
Punch
Adjusts the transfer current OFF timing for copying with
punch.
[–30 to +30/-16/1 mm]
2935*
Transfer Current On/Off Timing: Tray 4 Japan Only
001 To 020