Ricoh D065 - Page 567

Service Program Mode Tables
D062/D063/D065/D066 4-34 SM Appendix
Thick Paper trailing edge during copying with thick paper..
[0 to +20/0/1 mm]
012
Off Timing: Thick
Paper Lc
Adjusts the transfer current OFF timing for copying thick
paper.
[–30 to +30/20/1 mm]
013 On Timing: OHP
Adjusts on transfer current ON timing for copying with OHP.
[–30 to +30/0/1 mm]
014
Leading Edge:
OHP
Adjusts the area where the transfer current is applied for the
leading edge during copying with OHP.
[0 to +20/0/1 mm]
015
Trailing Edge:
OHP
Adjusts the area where the transfer current is applied for the
trailing edge during copying with OHP.
[0 to +20/0/1 mm]
016 Off Timing: OHP
Adjusts the transfer current OFF timing for copying with
OHP.
[–30 to +30/20/1 mm]
017
On Timing:
M-Thick
Adjusts the transfer current ON timing for copying with
M-thick paper.
[–30 to +30/0/1 mm]
018
Leading Edge:
M-Thick
Adjusts the area where the transfer current is applied for the
leading edge during copying with M-thick paper.
[0 to +20/0/1 mm]
019
Trailing Edge:
M-Thick
Adjusts the area where the transfer current is applied for the
trailing edge during copying with M-thick paper.
[0 to +20/0/1 mm]
020
Off Timing:
M-Thick
Adjusts the transfer current OFF timing for copying with
M-thick paper.
[–30 to +30/15/1 mm]
021
On Timing: After
Punch
Adjusts the transfer current ON timing for copying with
punch.