Electrical Components
SM 139 D454/D615
Multi-Folding
Unit
D454/D615
Motors
M
Registration Roller Release
Motor
Releases the pressure of the registration
roller so paper can be stacked for multi-sheet
folding.
M Dynamic Roller Lift Motor
Raises and lowers the dynamic roller to the
correct position for folding.
M Stopper 2 Motor
Moves Stopper 2 to the correct position for
folding according to the paper size.
M
Dynamic Roller Transport
Motor
Drives the Dynamic roller.
M
Registration Roller Transport
Motor
Drives the registration roller.
M Direct-Send JG Motor
Operates the direct send junction gate to the
Stopper 2.
M FM6 Pawl Motor
Drives the double-flap pawl that prevents
bending of the leading edge when the 3rd fold
is executed for FM6 folding (Fourths with 2
Flaps In)
M Stopper 3 Motor
Moves Stopper 3 to the correct position for
folding according to the paper size.
M 2nd Fold Motor
Drives 3rd fold roller. Reverses when the
paper does not pass through the 3rd fold unit.
M Crease Motor Drives the crease rollers.
To Next Page
Loading...
