Details
D454/D615 140 SM
Sensors
S Top Tray Exit Sensor
Checks for the presence of paper at power
on. Detects paper jams at the exit of the
top tray. Used to create timing for control
of paper fed to the top tray.
S Entrance Sensor
Checks for the presence of paper at power
on. Detects paper jams of paper fed from
the upstream unit. Used to create timing
for operation of the shift roller during
multiple-sheet folding.
S Entrance JG HP Sensor
Detects when the entrance junction gate is
in and out of its home position.
S Horizontal Path Paper Sensor
Checks for the presence of paper at power
on.
S Top Tray Paper Path Sensor
Checks for the presence of paper at power
on. Also checks for jams during paper
feed.
S Top Tray Full Sensor (E) Detects when the top tray is full.
S Top Tray Full Sensor (R) Detects when the top tray is full.
S Horizontal Path Exit Sensor
Checks for the presence of paper at power
on. Checks for paper jams when paper
exits to the downstream unit. Used to
create timing for paper exit to the
downstream unit.
S Vertical Path Paper Sensor
Checks for the presence of paper at power
on.
S Positioning Roller HP Sensor
Detects when the jog roller is in and out of
its home position.
To Next Page
Loading...
