Ricoh D131 - Page 526

SC700: Peripherals
SM Appendix 2-59 D131/D132/D133
Appendix:
Service Call
Conditions
SC722-42 B
Finisher stapler movement motor error (D610)
The stapler HP sensor is not activated within the specified time
after the stapler motor turned on. The 1st detection failure issues a
jam error, and the 2nd failure issues this SC code.
 Stapler movement motor disconnected, defective
 Stapler movement motor overloaded due to obstruction
 Stapler HP sensor disconnected, defective
SC722-43 B
Finisher corner stapler rotation motor error (D610)
The stapler does not return to its home position within the specified
time after stapling. The 1st detection failure issues a jam error, and
the 2nd failure issues this SC code.
 Stapler rotation motor disconnected, defective
 Stapler rotation motor overloaded due to obstruction
 Stapler rotation HP sensor disconnected, defective
SC722-44 B
Finisher corner stapler motor error (D610)
The stapler motor does not switch off within the prescribed time
after operating. The 1st detection failure issues a jam error, and the
2nd failure issues this SC code.
 Staple jam
 Number of sheets in the stack exceeds the limit for stapling
 Stapler motor disconnected, defective