Service Call
Conditions
SC920
B
Printer application error GW
00 No response when PM started up
01 Timeout error during PM operation
02 Working memory error
03 Cannot start filter process
04 Abnormal exit from filter process
An error was detected in the printer application program and
operation cannot continue.
Defective software
Unexpected hardware resource (e.g., memory shortage)
1. Software err, cycle the machine off/on
2. Insufficient memory, add more memory
SC921 B
Printer font error GW
A necessary font is not found when starting up the printer application.
A requested font is not found in the SD card.
Cycle the machine off/on
To Next Page
Loading...
