SP1000 Feed
D131/D132/D133 3-6 SM Appendix
10 Small Size – Thick Paper (Center)
Fusing temperature at center of hot roller when printing on thick paper:
D131/D132: [150 to 205/190/1 degree C]
D133: [150 to 200/195/1 degree C]
11 Label (Center Thermistor)
D131/D132: [150 to 205/200/1 degree C]
D133: [150 to 205/195/1 degree C]
12 Label (End Thermistor)
D131/D132: [150 to 205/200/1 degree C]
D133: [150 to 205/195/1 degree C]
13 Tab Sheet (Center Thermistor)
D131/D132: [150 to 205/200/1 degree C]
D133: [150 to 205/195/1 degree C]
14 Tab Sheet (End Thermistor)
D131/D132: [150 to 205/200/1 degree C]
D133: [150 to 205/195/1 degree C]
1106 Fusing Temperature Display
1 Center Temperature
Shows the temperature of the hot roller detected by the thermistor at the
center of the hot roller.
2 End Temperature
Shows the temperature of the hot roller detected by the thermistors at the
ends of the hot roller.
3 Pressure Roller Temperature
Shows the temperature of the hot roller detected by the thermistors at the
pressure roller.
To Next Page
Loading...
