Ricoh D147 - Page 1066

Main SP Tables-2-2
System Maintenance Section 2-347 D146/D147/D148/D149/D150
SP Mode Tables
003
Idle Time: FC *ENG [0 to 600 / 30 / 1sec/step]
Operating time for applying lubricant for FC (s)
2990 [Print Duty Control]
001
Duty Control State *ENG
[0 or 1 / 0 / 1/step]
0: Non restricted
1: Restricted
Displays current imaging Duty restrict status.
002
Exec Interval: Duty Control *ENG [60 to 3600 / 60 / 10sec/step]
Sets decision time interval for to decide whether to restrict imaging Duty.
004
Forced CPM Down Thresh:
No Duty Control
*ENG [0 to 5000 / 0 / 1page/step]
Sets force fall threshold for when imaging Duty is not restricted.
005
Down-time_BW: No Duty
Control
*ENG [0 to 20000 / 0 / 10msec/step]
Sets BW mode break time for when imaging Duty is not restricted.
006
Down-time_FC: No Duty
Control
*ENG [0 to 20000 / 0 / 10msec/step]
Sets FC mode break time for when imaging Duty is not restricted.
007
Forced CPM Down Thresh:
Duty Control
*ENG [0 to 5000 / 20 / 1page/step]
Sets force fall threshold for when imaging Duty is restricted.
008
Down-time_BW: Duty Control *ENG [0 to 240000 / 25000 / 10msec/step]
Sets BW mode break time for when imaging Duty is restricted.
009
Down-time_FC: Duty Control *ENG [0 to 240000 / 25000 / 10msec/step]
Sets FC mode break time for when imaging Duty is restricted.