Ricoh D147 - Page 1587

Output Check Table
D146/D147/D148/D149/D150 3-48 System Maintenance Section
009
Punching Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
010
Punch Move Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
011
S-to-S Registration Detection
Move Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
012
Lower Junction Solenoid
Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
013
Jogger Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
014
Positioning Roller Rotation
Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
015
Feed-out Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
016
Booklet Stapler Move Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
017
Corner Stapler Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
018
Booklet Stapler Jogger Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
019
Booklet Stapler Jog Solenoid
Move Motor
ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.