Ricoh D147 - Page 1589

Output Check Table
D146/D147/D148/D149/D150 3-50 System Maintenance Section
031
Drag Roller Vibrating Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
032
LE Guide Motor ENG [0 or 1 / 0 / 1/step]
Drives specified motor for a certain period of time to test operation.
033
Navigation LED (All) ENG [0 or 1 / 0 / 1/step]
Lights all guide LED.
6136
[OUTPUT Check: FrontFIN]
Continuously drives specified motor for operation test.
001 Entrance Motor *ENG [0 or 1 / 0 / 1/step]
002 Carry Motor ENG [0 or 1 / 0 / 1/step]
003 Exit Motor ENG [0 or 1 / 0 / 1/step]
6136
[OUTPUT Check: FrontFIN]
Drives specified motor for a certain period of time to test operation.
004 Front Jogger Motor ENG [0 or 1 / 0 / 1/step]
005 Rear Jogger Motor ENG [0 or 1 / 0 / 1/step]
006 Shift Motor ENG [0 or 1 / 0 / 1/step]
007 Hitroll Motor ENG [0 or 1 / 0 / 1/step]
008 Exit Guide Plate Motor ENG [0 or 1 / 0 / 1/step]
009 Staple Moving Motor ENG [0 or 1 / 0 / 1/step]
010 Tray Motor ENG [0 or 1 / 0 / 1/step]
011 Staple Motor ENG [0 or 1 / 0 / 1/step]
012 Stopper Motor ENG [0 or 1 / 0 / 1/step]
013 Punch Motor ENG [0 or 1 / 0 / 1/step]
014 Punch Moving Motor ENG [0 or 1 / 0 / 1/step]