Main SP Tables-1
D146/D147/D148/D149/D150 2-142 System Maintenance Section
1950
[Fan Cooling Time Set]
Sets fan operation time during after print standby.
002 Dev Cooling Fan A *ENG
[0.0 to 120.0 / 0.0 / 0.1min]
003 Dev Cooling Fan B *ENG
005 Ozone Fan *ENG
006 Fusing Fan *ENG
007 Paper Exit Cooling Fan *ENG
011 Electrical Cooling Fan *ENG
1951
[Fan Start Time Set]
Sets fan operation start time when recover from engine off mode.
002 Dev Cooling Fan A *ENG
[0 to 900 / 120 / 1sec/step]
003 Dev Cooling Fan B *ENG
005 Ozone Fan *ENG
006 Fusing Fan *ENG
007 Paper Exit Cooling Fan *ENG
011 Electrical Cooling Fan *ENG
1952 [Fan Control Off Mode Time Set]
001
- *ENG [0 to 60 / 10 / 1min./step]
Sets off mode time till start fan control.
To Next Page
Loading...
