Main SP Tables-2-1
System Maintenance Section 2-177 D146/D147/D148/D149/D150
2119 [Skew Adjustment Display]
001
M *ENG [-75 to 75 / 0 / 1pulse/step]
M: skew current location: display.
002
C *ENG [-75 to 75 / 0 / 1pulse/step]
C: skew current location: display.
003
Y *ENG [-99 to 99 / 0 / 1pulse/step]
Y: skew current location: display.
2120 [Thick Paper Skew Adj]
001
On/Off *ENG [0 or 1 / 0 / 1/step]
Corrects thick paper skew.
2121 [Skew Adjust Coefficient]
001
Coefficient *ENG [0 to 2 / 0 / 1/step]
Correcting coefficient for skew.
2140 [TM/ID Sensor Check Result]
005
PWM: Front ENG [0 to 1023 / 0 / 1/step]
Saves / Refreshes PWM setting value of TMP sensor [Front] to this setting
value when Vsg adjustment is done.
From then on, PWM setting value will be this setting value during belt check.
When Vsg adjust fails, saving / refreshing will not be done to this setting
To Next Page
Loading...
