Ricoh D147 - Page 898

Main SP Tables-2-1
System Maintenance Section 2-179 D146/D147/D148/D149/D150
SP Mode Tables
2142 [TM/ID Sensor Check Result]
005
Maximum: Front *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Front] detecting result data, and
from of all sampling data, save / refresh this SP with the max. value.
006
Maximum: Center *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Center] detecting result data, and
from of all sampling data, save / refresh this SP with the max. value.
007
Maximum: Rear *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Rear] detecting result data, and from
of all sampling data, save / refresh this SP with the max. value.
2143 [TM/ID Sensor Check Result]
005
Minimum: Front *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Front] detecting result data, and
from of all sampling data, save / refresh this SP with the min. value.
006
Minimum: Center *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Center] detecting result data, and
from of all sampling data, save / refresh this SP with the min. value.
007
Minimum: Rear *ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
With the image transfer belt / TMP sensor check mode result, take average of
each 10 sampling data from TMP sensors [Rear] detecting result data, and from
of all sampling data, save / refresh this SP with the min. value.