B245/B276/B277/B268/B269 Service Manual 18-Jan-06
155
default of 3 and Photo 1, 3 have a default of 1.
1: No removal applied.
2 – 5: Removal applied at the level specified here. The higher the setting
(level), the less clear the image will become (more texture removal). This
setting is only applied to the originals in SP 4921.
4926 1 Texture Removal (Copy)
[0 ~ 6 / 1/step]
4926 3 Texture Removal (Scanner)
[0 ~ 6 / 1/step]
Line Width Correction
4927*
Adjusts the line width correction algorithm. Positive settings produce thicker
lines; negative settings produce thinner lines. This setting is only applied to the
originals in SP 4921.
4927 1 Line Width Correction (Copy)
[–2 ~ 2 / 0 / 1/step]
4927 3 Line Width Correction (Scanner)
[–2 ~ 2 / 0 / 1/step]
Independent Dot Erase
4928*
Selects the dot erase level. Higher settings provide greater erasure. This
setting is only applied to the originals in SP 4921.
4928 1 Independent Dot Erase (Copy)
[–2 ~ 2 / 0 / 1/step]
4928 3 Independent Dot Erase (Scanner)
[–2 ~ 2 / 0 / 1/step]
Positive/Negative
[0 = No, 1 = Yes]
4929*
Inverts white and black. This setting is only applied to the originals in
SP 4921.
4929 1 Positive/Negative (Copy)
Sharpness-Edge
[–2 ~ 2 / 0 / 1/step]
4930*
Adjust the clarity. This setting is only applied to the originals in
SP 4921.
4930 1 Sharpness-Edge (Copy)
4930 3 Sharpness-Edge (Scanner)
Sharpness-Solid
[–2 ~ 2 / 0 / 1/step]
4931*
Adjust the clarity. This setting is only applied to the originals in
SP 4921.
To Next Page
Loading...
