Risco ProSYS Plus - Firmware Update; Zones

11
/
2017 Page 103 5IN2413 B
 Firmware Update
Set parameters when updating the system firmware.
Note
The firmware update menu option series is visible only if the IP or GSM module is installed.
System  Firmware Update
Quick keys Parameter Default Range

Server IP
firmware.riscogroup.com
Enter the IP address of the router/gateway where the upgrade file is
located.

Server Port
80
Enter the port on the router/gateway where the upgrade file is located

File Name
CMD.TXT
(case sensitive)
Enter the firmware update file name.
NOTE: Please contact Customer Support services for the file name
parameters

Download File
Select the communication path for the upgrade.
 Via IP
 Via GPRS
 Zones
Configure the following "basic" zone parameters for all types of zones. Each zone
can be defined as a wired zone, a wireless zones or a bus zone. The attributes for
each zone vary according to the zone’s type. The following sub-menus are
available:
• Parameters
• Testing
• Cross Zones
• Alarm Confirm