Risco ProSYS Plus - Local Announcements

11
/
2017 Page 192 5IN2413 B
 Local Announcements
Audio  Local Announcements
Quick keys Parameter Default Range

Local Announcement
Upon event occurrence, the system can announce the security situation to
occupants of the premises by sounding a local announcement message from
the add-on Listen-In & Speak unit. This announcement message can be
enabled or disabled (by toggling to Y or N) per event. Enable or disable each
of the following message announcements according to your customer request.
Announcement Description Default
 Intruder alarm
Intruder alarm Yes
 Fire alarm
Fire alarm Yes
 Emergency
Emergency (medical) alarm Yes
 Panic alarm
Panic alarm Yes
 Tamper alarm
Tamper alarm Yes
 Environmental alert
Flood, Gas, CO or Temperature alert
Yes
 Away arm
System/Partition armed in Away
(Full) arm
Yes
 Stay arm
System/Partition armed in
Stay(Partial) arm
Yes
 Disarm
System/Partition disarmed Yes
 Audible Status
Status heard when pressing the status
button on the keypad/remote control
Yes
 Entry / Exit
System in exit or entry delay Yes
 Auto arm
System in auto arm process Yes
 Output
Output activated or deactivated No
 Walk test
Walk test. The ProSYS Plus will
sound the zone number and
description
Yes