Risco ProSYS Plus - Wireless Zones: 1-Way and 2-Way Smoke; Wireless Zones: 2-Way PIR, Watchout and Wireless IR Beam

11
/
2017 Page 127 5IN2413 B
Wireless Zones: 1-Way and 2-Way Smoke
Quick Keys Parameter Default Range
ZZZ
Serial No.
The identifying 11-digit number on the detector sticker
ZZZ
Control
ZZZ
Supervision
No Yes/No
Determines if this zone will be supervised by the system expander
according to the time defined under the timer RX Supervision
(see
RX Supervise, page 79).
ZZZ
LED Enable
Yes Yes/No
Defines whether or not the LEDS operation mode is enabled
ZZZ
(2-Way Smoke Only)
Operation Mode Smoke & Heat S/H/S&H
Defines the detector operation mode.
 SMOKE  HEAT  SMOKE & HEAT
Wireless Zones: 2-Way PIR, WatchOUT and Wireless IR Beam
Quick Keys Parameter Default Range
ZZZ
Serial No.
The identifying 11-digit number on the detector sticker
ZZZ
Control
ZZZ
Supervision
No Yes/No
Determines if this zone will be supervised by the system expander
according to the time defined under the timer RX Supervision
(see
RX Supervise, page 79).
ZZZ
LED Enable
Yes Yes/No
Defines whether or not the LEDS operation mode is enabled
ZZZ
Anti Mask
(WatchOUT Only)
No
Yes/No
Defines the operation of anti-masking detection and behaves
according to the settings defined in quick keys
ZZ