Risco ProSYS Plus - Page 126

11
/
2017 Page 126 5IN2413 B
Quick Keys Parameter Default Range
 ZZZ 
Temperature
Sensitivity
Off
Defines the sensitivity to temperature change.
 OFF  ON
 ZZZ 
Self Test
Remote
Used to test the detection technologies. In the event of a failed test, a
self-test trouble is created
 REMOTE (Manual) - The remote self-test is performed by the
system when a user manually selects the Diagnostics option from the
Maintenance menu via the ProSYS Plus User Functions menu
 LOCAL (automatic) - Once an hour, the detector automatically
checks that the detector’s channels are functioning properly.
 ZZZ 
LEDS
On
Defines the LEDS operation mode.
 OFF - Disables the LEDS operation.
 ON – Enables the LEDS operation
ZonesParametersBy CategoryAdvancedWireless Zones Configuration
Quick Keys Parameter Default Range
 
Wireless Zones Configuration
The Wireless Zone Parameters menu contains parameters that enable
you to program the special parameters of a 1-way or 2-way wireless
zone. The options are determined according to the wireless detector
type. For example:
• 2-Way WatchOUT: A dual technology outdoor detector with
signal processing based on two Passive Infrared (PIR) channels
and two Microwave (MW) channels.
• 2-Way Magnet: Contact detector (x73) – models include shutter
and universal
• 2-Way IR Beams
• 1 & 2-Way Smoke detector
• 2-Way PIR
• Also Shock, Flood, Gas, CO, and Curtain detectors
Use the instructions below to set parameters for the relevant wireless
zone detector. Also see the instructions packaged with each detector.