Risco ProSYS Plus - Communication; Method

11
/
2017 Page 150 5IN2413 B
 Communication
Define the following parameters for establishing system communication:
• Method
• Monitoring Station
• Configuration Software
• Follow Me
• Cloud
• Reporting Priority
 Method
Define communication channel parameters for the following methods:
• PSTN
• GSM
• IP
• LRT
Communication  Method  PSTN
Quick keys Parameter Default Range

PSTN
The PSTN screens contain parameters for the communication of the ProSYS
Plus over the PSTN network.

Timers
Timers related to communication through the PSTN channel
 
PSTN Lost
4 minutes
0
—20 minutes
The time after which the system will regard the PSTN line as lost. This time
also specifies the delay before reporting the event into the event log or
operating a utility output that follows this event.
00 indicates no supervision of the phone line.
 
Wait for Dial Tone
3
0—255 seconds
The number of seconds the system waits to detect a dial tone.