Risco ProSYS Plus - Sounder

11
/
2017 Page 201 5IN2413 B
Quick keys Parameter Default Range
Options for 2-Way Keyfob
The available programmable functions for the buttons:
 Label

Serial No
 Masking: Specifies the partitions that are controlled by the device.
 Controls  Panic Enable: Disable/enable panic alarm button
 PIN code (for arming in high-security mode)
 UO Key 1: Used to operate a single utility output
 UO Key 2: Used to operate a single utility output
UO Key 3
: Used to operate a single utility output
 Sounder
Define the following for an external siren that is connected to the ProSYS Plus as a
bus accessory:
• Parameter
• Bus Sounders
• 2-Way WL Sounders
Note
Access to this sub-menu requires that a sounder device is installed on your site.
Device  Sounder  Parameter
Quick Keys Parameter Default Range

Parameters
Use this menu to define all parameters of the siren. Note that some
parameters are only relevant for specific siren models.
Select a sounder and press OK.
Device  Sounder  Parameter  Bus Sounders
Quick Keys Parameter Default Range

Label
As assign the sounder a label (description)

Masking
Use this menu to define parameters relating to masking