Risco ProSYS Plus - Keyfob

11
/
2017 Page 200 5IN2413 B
Quick keys Parameter Default Range

UO Key 3
Assign a utility output to be activated by a long press on function key 3
 Keyfob
Devices  Keyfob
Quick keys Parameter Default Range

Keyfob
Options for the 1-Way Keyfob:
The keyfob menu defines the operation of the wireless buttons keys. Each
keyfob consists of 4 buttons, and each button can be programmed to
a different mode of operation.
1. The first step in the menu is to select a user. Each user has a single
keyfob. When selected press OK ( ).
2. Select a button (1—4) and define the button operation according to the
options below.
Note
Each key has its own list of options. The list varies between the keys.
The available modes of operation are:
 None: Button disabled.
 Arm: The button is used for away (full) arming of the assigned
partitions.
 Disarm: The button is used for disarming its assigned partitions.
 Stay: The button is used for stay (home) arming of the assigned
partitions.
 Group: The button is used for Group arming.
 UO: The button is used to operate a single utility output
 Panic: The button is used to send a panic alarm.
Note
Stay (partial) arming or Away (full) arming can be defined as instant or
delayed (Exit Delay).
The available options for each button are:
Button 1 (
): None, Away. Stay, Group, UO
Button 2 (): None, Disarm, UO
Button 3: None, Away. Stay, Group, UO, Panic
Button 4: None, Away. Stay, Group, UO