Risco ProSYS Plus - Defining Parameters - Additional Installer Menus; Activities Menu; Follow Me Menu

11
/
2017 Page 210 5IN2413 B
Defining Parameters – Additional Installer Menus
You can program additional system parameters in installer menus (other than the
Programming menu):
Activities Menu
Activities parameters
Keypad Sound
Chime
Keypad Chime—Use the scroll buttons to turn the keypad's internal sounder ON or OFF
for any function utilizing the chime.
Partition Chime—Use the scroll buttons to turn internal sounders ON or OFF for all
keypads in the partition (for all functions utilizing the chime).
Buzzer ON/OFF—Use the scroll buttons to turn the keypad's internal buzzer ON or OFF
during both Entry and Exit Delay time periods, and during all fire and intrusion alarms.
Advanced
Service Mode—Press OK to activate / deactivate the service mode, which silences alarms
in order to enable battery replacement for detectors and accessories. For setting Service
Mode parameters, see Service Mode on page 171.
MS Test — Press OK to initiate a test message to the monitoring station according to IMQ
and EN50131 requirements.
Follow Me Menu
Follow Me parameters
Define – Press OK, and then scroll to a FM destination number (up to 64) to define
Destination – For the selected FM destination number, enter the Follow Me destination
information, according to its type (voice message, SMS or E-mail), and then press OK. For
more information, see Follow Me, page 181.
Label – For the selected FM destination number, scroll to enter (over the existing or default
label) an identifying description, and then press OK.
Terminate Follow Me – A Follow Me destination can be terminated (deleted).
Test FM – For testing Follow Me reporting