Risco ProSYS Plus - Monitoring Station

11
/
2017 Page 163 5IN2413 B
 Monitoring Station
Define the following, which enable the system to establish communication with up
to three monitoring station accounts:
• Report Type
• Accounts
• Communications Format
• Controls
• Parameters
• MS Timers
• Report Split
• Report Codes
Communication  Monitoring Station  Report Type
Quick Keys Parameter

Report Type
Defines the communication type that the system will establish with
each monitoring station account. The system can report in these
(optional) communication channels: Voice, IP, SMS, LRT, SIA IP.
NOTE: If there is a communication fault with the monitoring station
the panel will not be ready to arm.
 –
Select MS
Scroll to select the monitoring station account (MS 1—MS 3) for
which you want to define the reporting type, and then press OK.
– –
MS Channel
Scroll to select the communication channel to use for reporting to
the monitoring station account, and then press OK:
 Voice
 IP
 SMS
 LRT
 SIA IP