Risco ProSYS Plus - Bus Zone: Iwise;Bware QUAD Grade 3

11
/
2017 Page 122 5IN2413 B
Bus Zone: iWISE/BWare QUAD Grade 3
Quick Keys Parameter Default Range
 ZZZ 
LEDS
On
Defines the LEDS operation mode.
 OFF - Disables the LEDS operation.
 ON – Enables the LEDS operation.
 ZZZ 
PIR Sensitivity
High
Defines the PIR sensitivity of the detector.
 LOW  HIGH
 ZZZ 
Anti-Mask
Enable
Defines the operation of anti-masking detection.
 DISABLE
 ENABLE and behaves according to the settings defined in quick
keys ZZZ
 ZZZ 
Arm/Disarm
No
Defines the operation of the anti-masking detection while the detector
is armed or disarmed.
 NO – While armed or disarmed, anti-mask behaves according to
the setting defined in quick keys
ZZZabove.
 YES – While armed, anti-mask is disabled. When detector is
disarmed Anti-mask behaves according to the settings defined in
quick keys
ZZZ.
 ZZZ 
Self Test
Remote
Used to test the detection technologies. In the event of a failed test, a
self-test trouble is created
 REMOTE (Manual) - The remote self-test is performed by the
system when a user manually selects the Diagnostics option from the
Maintenance menu via the ProSYS Plus User Functions menu
 LOCAL (automatic) - Once an hour, the detector automatically
checks that the detector’s channels are functioning properly.