Risco ProSYS Plus - Install; Bus Devices

11
/
2017 Page 193 5IN2413 B
 Install
The following enable adding, removing or testing accessories in the system:
• Bus Devices
• Wireless Device
 Bus Devices
The Bus Device sub-menu provides access to the following:
• Automatic
• Manual
• Testing
Install  Bus Devices  Automatic
EN 50131-3 Note
The automatic setting/unsetting function (Auto Settings) is not in compliance with
EN50131-3
Quick Keys Parameter Default Range

Automatic
This menu enables you to perform an automatic "Auto Settings" bus scan
in order to recognize, enable (allocate), and perform on-the-fly
configuration for all bus devices connected in the system. See Auto-Setting
Scan for Communication Modules & Bus Devices, page 53 and Bus Scan
(Auto Setting)
on page 196.