Risco ProSYS Plus - Follow Me

11
/
2017 Page 181 5IN2413 B
 Follow Me
In addition to reporting to the monitoring station, the Follow-Me feature enables
reporting system events to pre-defined follow me user destinations using a voice
message, SMS message or E-mail. Up to 64 Follow Me destinations can be defined
in the system. The following FM parameters can be defined:
• Define FM
• Controls
• Parameters
Note
If FM is enabled and no voice module is installed then “beeps” will be sent instead of
messages.
Communication  Follow Me  Define FM
Quick Keys Parameter Default Range

Define FM
Up to 64 Follow Me destinations can be defined in the system. Select a
follow destination from the list

Report Type
Defines the type of reporting events to a Follow Me destination.
NOTE:
 = FM number

Voice
Report to follow me will be done by voice message thorough the GSM
network. Enter the telephone number including area code or special letters
for Follow Me defined as SMS or Voice.
Reporting events by Voice can be established through different channels.
The optional channels depend on the hardware installed in the system.
Select the required channel as follows:
 PSTN/GSM:
 GSM/PSTN:
 PSTN Only:
 GSM Only: The outgoing calls are executed through the GSM audio
channel only.