Risco ProSYS Plus - Page 182

11
/
2017 Page 182 5IN2413 B
Quick Keys Parameter Default Range

EMAIL
Report to Follow Me will be done by e-mail thorough IP or GPRS (or GSM –
depending which modules are installed). Each e-mail contains information
including the system label. Event type and time. Enter the e-mail address
for Follow Me destination defined as IP type.
 IP/GPRS (or IP/GSM): The system checks for the availability of the IP
network. During regular operation, emails will be sent using the IP network
line. In case of trouble in the IP network, the email is routed to the GPRS
network.
 GPRS/IP (or GSM/IP): The system checks for the availability of the
GPRS/GSM network. During regular operation mode emails will be sent
using the GPRS/GSM. In case of trouble, the email is routed to the IP
network.
 IP Only: The report is executed through the IP network only
 GPRS Only (or GSM Only): The report is executed through the
GPRS/GSM network only

SMS
Report to Follow Me will be done by SMS. Each event message contains
information including the system label, event type and time. Enter the
telephone number including area code or special letters.

Partition
Assign the partitions from which events will be reported to the Follow Me
number.

Events
Each Follow Me destination can be assigned with its own set of events.
Choose the events that will be reported to each Follow Me
Event Description Default
Alarms
 Intruder
Intruder alarm in the system Yes
 Fire
Fire alarm in the system Yes
 Emergency
Emergency alarm in the system Yes
 Panic (S.O.S)
A panic alarm in the system Yes
 Tamper
Any tamper alarm in the system No
 Duress Alarm
Duress alarm in the system from user xx Yes
 Confirmed alarm
Confirmed alarm indication No