Risco ProSYS Plus - Cloud

11
/
2017 Page 187 5IN2413 B
Communication  Follow Me  Parameters
Quick Keys Parameter Default Range

Parameters
Allows to program parameters related to operation with the Follow Me

Follow Me Retries
03
01—15
Edit the number of times the Follow Me phone number is redialed

Voice Message
Recurrence
01
01—05
Edit the number of times a voice message repeats itself when establishing a
call to a Follow Me number

Follow Me Periodic
Test
(see Periodic
Test, page 171).
Set the time period that the system will automatically establish
communication to a Follow Me destination defined with the Periodic Test
event (see
Periodic Test, page 171).
 Cloud
Define the following parameters for Cloud communication:
Communication  Cloud
Quick Keys Parameter Default Range

Cloud
Define here the server settings for communication with the ProSYS Plus
system.
NOTE: For Cloud connectivity, Cloud must be enabled (default). To
enable/disable Cloud connectivity go to: 1)System  2)Controls 
3)Communication  4)Cloud Enable and then select Y (yes) to enable or
N (no) to disable
.

IP Address
www.riscocloud.com
The IP address or server name. If the ProSYS Plus system is connected to
the RISCO Cloud for self-monitoring, then use: riscocloud.com. Otherwise
enter the IP address or name where the private Cloud server is located.

IP Port
33000
The server port address