11
2017 Page 63 5IN2413 B
Wireless Device RF Transmissions
Wireless Device
(1-way and 2-way)
To send an RF transmission:
Detectors :
• WatchOUT
• BWare
• iWave
• iWise
• Door-Window Contacts
(Dual Channel, Pulse
Count, Universal)
• Shock
• Glassbreak
Insert battery. Press and hold the tamper switch for at
least 3 seconds.
Smoke & heat detectors
Insert battery. Transmission is sent automatically
within 10 seconds.
Gas detectors
Insert battery. Within 10 seconds, press and hold the
test button for 3 seconds.
CO detectors
Insert battery. Within 10 seconds, press and hold the
test button for 3 seconds.
Flood detectors
Insert battery. Press both tamper buttons (back and
cover) for at least 3 seconds.
WL beams
Insert battery. Press the tamper spring for 5 seconds.
Observe DIP switch settings according to model and
tamper usage.
Sirens (Round Indoor
siren, Lumin8 siren,
Outside sirens)
Insert battery. Within 10 seconds, press and hold the
tamper switch for 3 seconds.
2-way, 8-button remote
control
Press both buttons ( and ) for at least 7 seconds.
4-button rolling code
keyfob
Press and hold
for at least 5 seconds (the LED
lights up twice during the 5 seconds - the second time
indicates the transmission is being sent).
2-button panic keyfob
Press both buttons for at least 7 seconds.
Wristband panic
transmitter
Press the button for at least 7 seconds. The red LED
lights up during transmission.
2-Way WL Slim Keypad
Press and hold both buttons ( and ) for at least
2 seconds.
To Next Page
Loading...
