11
2017 Page 221 5IN2413 B
Appendix C: Installer Event Log Messages
Event Message Description
AC Low PS=y Loss of AC power from power supply ID=y
AC RST PS=y AC power restore on power supply ID=y
Activate UO=xx UO XX activation
Actv UO=xx KF=zz UO XX is activated from remote control ZZ
AL.ReinstateP=Y Alarm reinstatement on partition Y
Alarm Z=xx Alarm in zone no. XX
Alrm Cancel P=y Alarm is cancelled in partition ID=Y
AMPRX DTCT Z=xx Anti mask proximity detection on bus zone XX
AMPRX RSTR Z=xx Anti mask proximity detection restore on bus zone XX
ARM A:P=y C=zz Group A on partition Y is armed by user ZZ
ARM A:P=y KF=zz Group A on partition Y is set by wireless keyfob ZZ
ARM B:P=y C=zz Group B on partition Y is armed by user ZZ
ARM B:P=y KF=zz Group B on partition Y is set by wireless keyfob ZZ
ARM C:P=y C=zz Group C on partition Y is armed by user ZZ
ARM C:P=y KF=zz Group C on partition Y is set by wireless keyfob ZZ
ARM D:P=y C=zz Group D on partition Y is armed by user ZZ
ARM D:P=y KF=zz Group D on partition Y is set by wireless keyfob ZZ
ARM FAIL P=y Fail to Arm Partition X by Guard due to not ready zones
ARM:P=y C=zz Partition Y armed by user ZZ
ARM:P=y KF=zz Partition Y armed by wireless keyfob ZZ
Aut tst fail Failure of zone self-test
Auto test OK Automatic zone self-test OK
Aux RS PS=y Restore of Aux power on power supply ID=Y
Aux RS ZE=y Restore of S. Aux power on zone expander Y
Aux TRBL RS S=y Auxiliary trouble restore on the siren ID=Y
Aux TRBL SIR.=y Auxiliary trouble on the siren ID=Y
Bat Load RS S=y Battery load trouble restore from siren ID=Y
Bat Load SIR.=y Battery load trouble from siren ID=Y
Bat Rst PS=y Low battery trouble restore from power supply ID=Y
BELL RS PS=y Bell trouble restore in power supply ID=Y
Bell tamper Bell tamper alarm
Bell tmp rs Bell tamper alarm restore
Box tamper Box tamper alarm from main unit
Box tmp rs Box tamper alarm restore
Bypass Box+Bell Box + Bell tamper is bypassed
To Next Page
Loading...
