11
2017 Page 147 5IN2413 B
Codes User
Quick keys Parameter Default Range
YYY
Partition
Specify the partition(s) for which the designated user can have access by
using. Press a number to assign, or press the same number again to clear it.
YYY
Authority Level
Assign the authority level of each user (for each user code). There are 8
authority levels (not including the Grand Master level). Toggle between the
different levels:
• Master: There are no restrictions in the number of master codes (as
long as they do not exceed the number of codes remaining in the
system).
o Restricted to assigning and changing user codes belonging to
those with authority levels of master and below (user, arm only,
maid, unbypass, guard, UO control)
o Restricted access to designated partitions
• User: There are no restrictions in the number of user codes (as long as
they do not exceed the number of codes remaining in the system).
The user has access to the following:
o Arming and disarming
o Bypassing zones
o Accessing designated partitions
o Viewing system status, trouble, and alarm memory
o Resetting the switched auxiliary output
o Activating designated utility outputs
o Changing his/her own user code
• Arm Only: There are no restrictions in the number of Arm Only
codes (as long as they don’t exceed the number of codes remaining in
the system). Arm Only codes are useful for workers who arrive when
the premises are already open, but because they are last to leave,
they’re given the responsibility to close the premises and arm the
system. The users with Arm Only codes have access for arming one
or more partitions, and cannot change their own code.
To Next Page
Loading...
