11
2017 Page 189 5IN2413 B
Quick Keys Parameter Default Range
Controls
01–05
The ProSYS Plus supports parallel channel reporting (via IP, GPRS, GSM,
SMS, or voice) to both the monitoring station and FM when connected in
Cloud mode. Use this setting to decide if the panel reports events to the
monitoring station or Follow-Me in parallel to the report to the Cloud or
only as a backup when the communication between the ProSYS Plus and
the Cloud is not functioning.
NOTE: When the backup mode is functioning, the monitoring station
specifications are as defined under MS menu (see Monitoring Station, page
163 and Follow Me, page 181).
MS Call All
YES: Parallel reporting to the MS can be established via both the Cloud
and non-Cloud channels.
NO: Communication to the Monitoring station via the non-Cloud channels
can be established only in backup mode (when ProSYS Plus – Cloud
connection is down)
FM Call All
YES: Parallel reporting to the Follow Me destination can be established via
both the Cloud and non-Cloud channels.
NO: Communication to the Follow Me destination via the non-Cloud
channels can be established only in backup mode (when ProSYS Plus –
Cloud connection is down)
App Arm
Yes: Enables remote system arming from user app and Web user interface
No: Disables remote system arming from user app and Web user interface
App Disarm
YES: Enables remote system disarming from user app, Web user interface
NO: Disables remote system disarming from user app, Web user interface
IP Channel
The channel used for IP (if required)
Via LAN
Via WiFi (future use)
To Next Page
Loading...
