11
2017 Page 98 5IN2413 B
System Sounds Tamper
Quick keys Parameter Default Range
Tamper Sound
Sets the sound(s) produced by a tamper violation of a keypad and/or an
expansion module, as follows:
Silent — Produces no sound
Bell Only (external siren)
Buzzer Only (keypad piezo)
Bell + Buzzer
During Disarm
Buzzer
1—4
Sets the sound produced by tamper violation while the system is disarmed.
During Arm
Bell only
1—4
Set the sound produced by tamper violation while the system is armed.
System Sounds Speaker Volume
Quick keys Parameter Default Range
Speaker Volume
Sets the volume of internal sounder (speaker) connected to the Bells/LS (+
and –- terminals) according to different system modes. Volume range is
between 0 (silent) and 9 (maximum). After changing the volume, sound will
be emitted by the internal sounder to enable evaluation of the selected
volume level.
Trouble
9
0—9
Determines the volume of the internal sounder beeps while there is trouble
in the system.
Chime
9
0—9
Determines volume of internal sounder chime sound. The Chime sound is
used as an audible indication to a zone violation while system is disarmed.
Exit/Entry
9
0—9
Determines the volume of the beeps sounded from the internal sounder
during the Exit/Entry times.
Alarm
9
0—9
Determines the volume of the beeps sounded from the internal sounder
during an alarm.
To Next Page
Loading...
